Sanyo DC X900 - Remote Control Operation; Remote Control Layout and Functions

A
REMOTE CONTROL
Controls
1
‘4
“5
=8
1.
2,
3.
4.
Power switch (POWER)
Deckl controls
44W
: Fast forward and rewind switches
4 : Reverse play switch
} : Forward play switch
■ : Stop switch
Deck 2 controls
44*
: Fast forward and rewind switches
<: Reverse play switch
} : Forward play switch
■ : Stop switch
● /11 : Record/Record pause switch
MUTE: Record muting switch
Tuner controls
- TUN +: Tuning controls
PRESET: Preset tuning switch
BAND: Band select switch
MODE: FM mode switch
5.
6.
7.
8.
—
CD player controls
CD 10KEY: CD 10-key switch
INTRO: Introscan switch (Not in use for DC X900.)
RANDOM: Random play switch
MEMORY: Memory switch
REPEAT: Repeat play switch
5 : Disc tray open/close switch
K W : Skip/Search switches
➤/11 : Play/Pause switch
■ : Stop switch
Number switches
0-9, +10: For CD player
[1] - [12]: Fortuner
Amplifier controls
MUTE: Audio muting switch
CD: CD function switch
PHONO: PHONO function switch
VIDEO: VIDEO function switch
- VOL +: Volume controls
Sleep timer switch (SLEEP)
Number switches (O -9, +10 and [1] - [12])
All these switches are used to select both CD tracks and preset radio~
stations.
If the CD 10KEY switch is pressed then the switches select CD track
numbers.
If the BAND switch is pressed, the switches select preset radio stations.
Inserting batteries
1.
Open the battery compartment lid by pressing the latch.
2. Install 2 “AA/SUM-3/R6” size batteries (not supplied) into the battery
compartment matching the polarity as shown in the battety compart-
ment.
3. Replace the battery compartment lid.
Note:
Always remove batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage,
Remote control range
-5-