Accidental erasure prevention
To prevent accidental recording on a record-
ed cassette, remove its record tab. To record
on it later, cover the hole with adhesive tape.
1
1
5
5
6
6
5
5
2
2
2
2
3
3
4
4
Hint
Hint
•To view one chan-
nel while recording
another
1) While you are
recording on the
DVD+VCR, press
the VCR/TV button.
2) At the cable box
or satellite box,
select the channel
you want to view.
• If you have connect-
ed the DVD+VCR to
a cable box or satel-
lite box, refer to
“Hint for Cable Box
or Satellite Box”
section on page 6.
STOP
EJECT A
You can select a fixed recording time by press-
ing the REC/OTR button repeatedly.
To cue or review picture during playback
(Picture Search)
Press the g or h button (or F.FWD or REW
button).
• Press it again and the DVD+VCR will search in
super high speed. (in the LP/SLP modes only)
To freeze the picture on TV screen during play-
back (Still mode)
Press the PAUSE button. Each time you press the
button, the picture will be forwarded by one frame.
• If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing the SKIP/CH
G/K or H/L button (or CHANNEL buttons).
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
Counter Reset
Press the CLEAR/C.RESET button.
To play back in slow motion
Press the SLOW button during playback or the still
mode.
• If the noise bars appear on the TV screen, you can
reduce it by by pressing the SKIP/CH G/K or
H/L button (or CHANNEL buttons).
Auto Rewind
When a tape reaches its end during playback, fast-for-
ward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
DVD+VCR will eject the tape.
Other Operations
Hint
Hint
•
Still/Slow mode
will be automati-
cally cancelled
after 5 minutes
to prevent dam-
age to the tape
and the video
head.
• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.
4
4
You CAN NOT copy a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press the PAUSE button.
• During the rec-pause mode, five
C
marks appear on the TV
screen. Each
C
mark represents one minute.
• Press it again to resume recording.
To Next Page
Loading...
