Sanyo DVW-7100a - Timer Recording Setup

Hint
Hint
• To go back one step, press the s button (during
the steps [3] to [9].)
–
12
–
EN
VCR Functions
On-Screen Operations
1
1 To call up the main menu
4
4 To exit the menu
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
2 To select an item
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
3
3 To decide
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
STOP
PLAY
123
456
789
0 +10
POWER
SPEED
AUDIO
DISPLAY
SLOW
PAUSE
ENTER
MENU
TOP MENU SETUP
MODE V.SURR
SEARCH
MODE
A - B
REPEAT
ANGLE SUBTITLE
T-SET
DVD
REC OTR
VCR TV
SKIP CH.
CLEAR
C.RESET
VCR
RETURN
1
1
4
4
3
3
2
2
OR
4
4
Recording Features
•Insert a tape with its record tab into the DVD+VCR.
8
8
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED – –
2
2
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
3
3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
4
4 Select the desired month.
Select the desired day.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 SUN
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
1
1
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Select an empty program
number.
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.
5
5 Select the desired start time
(hour).
Select the minute.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 SUN
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
6
6
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
B PM
Select “AM” or “PM”.
7
7 Repeat the procedure in steps 5
and 6 to set the end time.
Select the desired channel.
Timer Recording
• If you have connected the DVD+VCR to a
cable box or satellite box as the
Connection A on page 6, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.
• You can program one
year in advance.
9
9
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP
B SP
SLP
Select the desired recording speed.
10
10
• TIMER REC light on the front panel appears.
The DVD+VCR will change to the DVD mode.
1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.
2) Select main menu by pressing the
MENU button.
3) Select "TIMER PROGRAMMING"
by pressing the K or L button.
Then, press the B button.
4) Select the program number which
you want to check by pressing the K
or L button. The details of the pro-
gram you selected will appear on
the TV screen.
• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.
• You may cancel the entire program
by pressing the s button while the
program number flashes.
5) Press the CLEAR/C.RESET button
to exit.
6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.
Press the STOP/EJECT button on
the DVD+VCR.
To cancel a Timer Recording in
progress
To Check, Correct, or Cancel a
Timer Program
VCRVCR
VCR
VCRVCR
VCR
VCR
Press the VCR button first.
VCR
Press the VCR button first.
• To set another program after step [9], press the
B button. Then, continue with step [2].
MENU
MENU
MENU
CLEAR
C.RESET
CLEAR
C.RESET
SUBTITLE
T- SE T
or
or
or
or
or
or
or
or
or
or
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
Program number which is
not set up flashes.
H9680UD_EN/SP.qx3 04.8.10 4:26 PM Page 12