Sanyo EM-C1800K - Control Panel; Displays; Multiple Quantity Selection Key; Programme Selection Keys

18
CONTROL PANEL
1. Displays
¡Displays remaining cooking time.
¡Displays remaining cooking power
levels.
¡Blinks while cooking.
¡Gives notice that it is time to replace
the Magnetrons.
4. Clear Key
¡For cancelling setting, interrupting the setting process when a
mistake has been made, or stopping cooking before the
completion of the cooking process.
5. Memory Key
¡For entering the desired power output and cooking time.
6. Power Key
¡For entering the desired power output into the unit’s memory.
7. Timer Key
¡For entering the desired cooking time into the unit’s memory.
8. Start Key
¡For timer cooking.
¡For restart at programmed cooking.
C
2
2
3
3456
7
890
C
12
3
47
65
8
1
2. Multiple Quantity Selection Key
¡For setting cooking to double or triple quantities.
These keys to be used in conjunction with the Programme key.
3. Programme Selection Keys
¡The unit is ready to begin operation as soon as the
heating time has been programmed, using these ten
keys (numbered 1 to 0).
The time selected will be displayed, and “count
down” after the process is begun.
¡For determining power output and cooking time
during programming.
2
3
1
0