Sanyo FVM4612 - USB Connection; Initial Setup

12
Need help? www.sanyoctv.com 1-800-877-5032
USB Connection
YourLCDTVfeaturesaJPEGPhotoViewer
thatallowswatchingdigitalstillpicturesfrom
yourUSBdiskpluggedtotheUSBslotatthe
sidepanel.
1. PlugyourUSBdisktotheUSBslotatthe
sidepanel.
2. Pressthe[INPUT]buttontoselect[USB]as
theinputsignal(seepage17fordetail).
Power Connection
1. PluginACpowercord(120VAC,60Hz)
2. Pressthe[POWER]button,(Followtheon-
screeninstructions).
Initial Setup
ForthefirsttimeafterpoweringonyourLCD
TV,theSetupWizardappears.
1. SelectthelanguageusedfortheOSD(On-
Screen-Display)Menu.
Setup Wizard (1/6)
Please select language
Move Select ENTER
English
Spanish
French
Cancel
2. SelecteitherHomeorShopmode.
Setup Wizard (2/6)
Previous Cancel
Please select Home/Shop
Home mode default settings are recommended for
in-home use. ENERGY STAR
®
qualified.
Shop mode is intended for in-store display and resets
video settings at Power On.
Select
Home Mode
Shop Mode
Move ENTER
Iflateryouwanttochangethemode,youcan
changeitviatheHome/Shopselectionunder
Energy OptionsontheSetupmenu(Seepage
16).
NOTE:
• TheHomemodeisintendedforhomeuse,
andwillsavemuchenergy.
• AnymenuorcontrolchangesintheShopmodewill
notbesavedwhentheLCDTVisturnedoff.