Sanyo FWBP506FF - LIST OF SETTINGS; Video Output Settings; Audio Output Settings; HDMI Connection Settings

EN 33
In ˝Settings˝, you can customize various kinds of Settings as you prefer.
Refer to the following instructions to navigate through the Setup Menu.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select ˝Settings˝, then press [OK].
3. Use [
] to select the desired Category, then press [OK].
4. Use [
] to move up and down the list to select Menus / Options.
5. To make a selection or to access options of an item, select the desired item, then press [OK].
• To go back to the previous screen, press [RETURN].
6. Press [HOME] to Exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in Gray is the default setting.
Category Menus / Options
Video Out TV Aspect 4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
16:9 Squeeze
Progressive Mode Auto
Video
Still Mode Auto
Field
Frame
AudioOut DRC Auto
On
Off
BD Audio Mode All
Primary/Secondary Audio
Primary Audio Only
HDMI HDMI CEC On
Off
Video Resolution Auto
480p
Deep Color Auto
Off
AudioOutput Bitstream
LPCM
9. LIST OF SETTINGS
continued on next page