Sanyo FWBP506FF - Software Update Procedure

EN 40
10.4. Software Update
HOME A ˝Settings˝ A ˝Others˝ A ˝Software Update˝
This unit lets you Update the Software yourself using a Software Update disc or USB Memory Stick.
The available discs are below:
• BD-RE/-R
• DVD-RW/-R
• CD-RW/-R
■ Disc / USB Memory Stick Update
You can update the Software by using a disc or USB Memory Stick.
Prepare a blank disc or USB Memory Stick for Software Update:
Access sanyo-av.com, and download the latest version Software to a blank disc or USB Memory Stick using a
PC by following the directions described on the Website.
• Use a blank disc or USB Memory Stick, download one Software per disc or USB Memory Stick. Write the
Software in the root directory of the disc or USB Memory Stick.
• For more details on how to download the Software, please refer to the Website.
1. Use [
] to select ˝Settings˝ in the Home Menu, then press [OK].
2. Use [
] to select ˝Others˝, then press [OK].
3. Use [
] to select ˝Software Update˝, then press [OK].
4. Use [
] to select ˝Disc˝ or ˝USB Memory Stick˝, then press [OK].
5. Use [
] to select ˝Yes˝, then press [OK].
6. Insert the disc or connect the USB Memory Stick for Software Update.
7. After loading disc or USB Memory Stick, confi rmation message will appear. Select ˝Yes˝ and press [OK].
8. The unit will restart automatically, then Software Update will start.
• It may take a while to complete the updating.
9. After the Update fi nishes, this unit will restart. Remove the disc or the USB Memory Stick from the unit.
CautionC
• Please do not unplug the AC power cord, eject the disc or disconnect the USB Memory Stick or press [
(POWER-ON/Standby)] to turn the unit to Standby mode while performing a ˝Disc / USB Memory Stick
Update˝.
NoteD
• Software Update will not change any of the current settings.