Sanyo FWBP507FF - Page 15

EN 15
C How to reset the OSD language
You can reset the OSD language if you selected the wrong Language.
1. Press [HOME] to display the home menu.
2. Use [
] to select “ ”, then press [OK].
• This item is “Setup” (English) / “Instalación” (Spanish) / “Installation” (French).
• From here on, please select one of the following items you can find on screen:
3. Use [
] to select “ ”, then press [OK].
4. Use [
] to select “Language” (English) / “Idioma” (Spanish) / “Langue” (French), then press [OK].
5. Use [
] to select “OSD”(English) / “OSD”(Spanish) / “Affichage sur l’écran”(French), then press [OK].
6. Use [
] to select your desired language, then press [OK].
7. If the items that were set are displayed in your desired language, then press [HOME] to exit.