To Next PageTo Next Page
Need help?Do you have a question about the Sanyo GCD 2700 and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| Tape Player | Yes |
| Cassette Deck | Double Cassette Deck |
| Remote Control | Yes |
| Tuner Bands | FM |
| Speakers | 2 Speakers |
| Type | Mini Hi-Fi System |
Details about laser safety and output for CD player.
How to program up to 32 selections from multiple discs for playback.
Operations for selecting and recording CD tracks onto tape.
How to fade out sound automatically at the end of tape sides.
How to record tracks with backward skip function.
Basic procedure for recording CD material to tape.
Procedures for removing the front panel assembly and its buttons.
Steps to remove the tape deck mechanism and its associated P.C. board.
Guidance on installing power cord, amp PCB, and power transformer.
Procedures for adjusting FM band reception and tuning.
Procedures for checking and adjusting the AM band reception.
Procedures for checking mechanism torques in the tape deck.
Steps for motor replacement and speed adjustments for tape decks.
Adjusting playback output levels for TAPE A and TAPE B.
Adjusting recording and playback gain levels.
Adjusting frequency response for recording and playback.
Describes the sequence of operations for the CD changer mechanism.
Identifies and explains the function of key parts of the CD changer.
Explains LCD indicators when service mode keys are pressed.
Verifies LCD PCB mounting by checking segment activation.
Checks CD player operations using LCD number display for error codes.
Adjusts tracking balance using the service mode.
Procedures for replacing the pickup and lubricating the CD mechanism.
Details lubrication and replacement steps for the CD changer mechanism.
Adjusts tracking balance using test disc and oscilloscope.
Checks the focus gain using test signals and oscilloscope.
Checks the tracking gain using test signals and oscilloscope.
Checks the eye pattern waveform for optimal CD playback.
Visual breakdowns of the unit's mechanical components.
Comprehensive list of all parts with reference numbers and descriptions.
Illustrates the functional blocks of key integrated circuits.
Detailed circuit diagrams for different sections (Tuner, Amp, Tape, CD).
Shows interconnections between PCBs and components.
Lists voltage measurements for ICs and transistors for diagnostics.
