-
2
-
Specifications
HEC-DR8700
200 - 290 W
33 W
AC Local voltage 50/60 Hz
30 minutes
730 mm (28
3
/4") [width] x 1,370 mm (53
7
/8") [depth] x 1,220 mm (48") [height]
* When upright (with foot rest retracted)
730 mm (28
3
/4") [width] x 1,940 mm (76
3
/8") [depth] x 760 mm (29
7
/8") [height]
* When reclined (with foot rest set horizontally)
(5 stages) Approx. 63 - 140 mm (2
3
/8" - 5
1
/2")
One up/down pass in approx. 34 sec.
Approx. 2.1 m (82
5
/8")
No gradation or Approx. 1 cm (
3
/8") / one press of button
Approx. 120 - 170 degrees
Back rest : Motor-driven type (Linked with foot rest)
Foot rest : Motor-driven type (Foot rest only)
Seat surface : Motor-driven type (Linked with back rest and foot rest)
(3 stages) Approx. 11 - 28 kPa
Approx. 780 mm (30
5
/8")
(Vertical stroke length : Approx. 660 mm) (25
7
/8")
Stand, Installation screws (Three)
Synthetic leather
(5 stages) Approx. 9 - 24 times/min.
Power consumption
Power dissipation of electric heating equipment
Power source
Rating time
Dimensions
Cord length
Approx. 90 kg (198 lbs.)Weight
Massager rollers up/down range
Height adjustment of
massaging rollers
Reclining angle
Reclining method
Lower body massaging
(Air pressure)
* There is a slight difference according to the part.
Accessories
Upholstery
Vertical movement speed
Partial stretching(Partial) :Repetition within Approx.210mm (8
1
/4")
Partial stretching(Focus) :Repetition within Approx.110mm (4
3
/8")
Frequency
Width
Gripping
(5 stages) Approx. 10 - 30 times/min.
Kneading(up/down)
(5 stages) Approx. 300 - 600times/min.Tapping
(5 stages) Approx. 4 - 14 times/min.Shiatsu
Tapping
(5 stages) Approx. 63 - 140 mm (2
3
/8" - 5
1
/2")
Spine stretching
Range of partial stretching
(MANUAL COURSES) Approx. 15 minutes
Timer
(WHOLE BODY SENSOR AUTOMATIC COURSES)
FULL AUTO
Approx. 17 minutes
STIFFNESS, RECOVERY, RELAX Approx. 15 minutes
QUICK Course
Approx. 8 minutes
(Maximum of Approx. 20 minutes due to stiffness detection)
(AUTOMATIC COURSES)
Approx. 15 minutes
To Next Page
Loading...
