EasyManua.ls Logo

Sanyo HEC-DR8700 - Massaging: Manual (Roller) Courses; Manual Roller Massage Operations

Sanyo HEC-DR8700
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
1
4
2
5
6
6
MASSAGING
(MANUAL[ROLLER] COURSES)
Open the cover of the remote control.
(See page 17)
Turn the sole warmer ON/OFF.
Press the OPERATION ON/OFF button.
Press
(See page 12
-
15)
Adjust the positions of the back rest and the foot rest.
Massaging of upper body
If an excessive force is applied to the cover, it may be
detached. In such a case, re
-
attach the cover according
to the following procedure.
4
How to attach the cover
Hook
Post
1
3
4
2
Hook
Post
Cover
3
Align the left hook on the back of
the cover with the left post on the
remote control.
Align the right hook on the back of
the cover with the right post on the
remote control and push the cover
onto the remote
control.
When the foot rest is fully lowered, the foot rest will rise a little.
When the massaging rollers are not located in the upper section, the massaging
rollers will move to the upper section and stop. [at the origin]
(During the movement, the icon of “ORIGIN” on the remote control flickers.)
When the button is pressed, the lamps of the sole warmer and remote control
will illuminate, and the sole warmer will turn on.

Other manuals for Sanyo HEC-DR8700

Related product manuals