Sanyo LCD-32K30TD - Picture and Audio Modes; Picture Mode Selection; Audio System Selection

17
(三) Cabinet Back Removal
Remove screws C and D, take the Cabinet Back offRemove screws C and D, take the Cabinet Back off and D, take the Cabinet Back offand D, take the Cabinet Back off.
(C: 16pcs, D: 5pcs)
Mechanical Disassembly
(二) Chassis Board and Stand Base Removal
1. Remove Screw E , take Power Board Holder, then take Power Board off.
2. Remove Screw A and E , take Main Board offRemove Screw A and E , take Main Board off Screw A and E , take Main Board offA and E , take Main Board off and E , take Main Board offand E , take Main Board offE , take Main Board off, take Main Board offtake Main Board off.
3. Remove Screw G and F , take Stand Base offRemove Screw G and F , take Stand Base off Screw G and F , take Stand Base offG and F , take Stand Base off and F , take Stand Base offand F , take Stand Base offF , take Stand Base off, take Stand Base offtake Stand Base off.
(A: 3pcs, E: 12pcs, F: 2pcs, G: 4pcs)
Picture 3.
MAIN BOARD
E
POWER BOARD
A
E
POWER BOARD HOLDER
D
D
F
G
G
Picture 4.
C
C
C
C
C
C
C
D
D
D
D
D
C
C
C
C
C
C
C
C
C
E
STAND BASE
Note: When remove Power Board and MAIN BOARD, please keep EARTH BRKT PWB.
And make sure of installing EARTH BRKT PWB if assemble the LCD TV set again.
EARTH BRKT
POWER PWB
EARTH BRKT
MAIN PWB