BASIC OPERATION
ECO mode is environmentally friendly mode by adjusting the screen-end power TV unit to reduce
power consumption. Press ECO button on Remote Control to set "ECO OFF", "ECO ON" or "ECO
SENSOR". And it will attain the best power consumption when "ECO ON" is selected.
ECO
MUTE
Should you wish to mute the sound, press MUTE button. To switch the sound back on, press
MUTE button again or press VOLUME(+/-) buttons on Side Control or on Remote Control.
Press SURROUND button on Remote Control to set "SURROUND OFF" or "SURROUND ON".
SURROUND
VOLUME CONTROL
To adjust the volume value desired by pressing VOLUME(+/-) buttons on Remote Control or on Side
Control. The volume dialogue box will appear on the screen for a short while.
VOLUME(+) button to increase volume, and VOLUME(-) button to decrease volume.
STILL ON
STILL
Press STILL button to switch the still function On or Off.
To cancel "Still" function:
Press STILL/ INPUT/ BACK/ POWER/ CHANNEL UP or DOWN button to
cancel the function.
Note:
●
When the still function is On, the picture freezes. However, the
sound is not affected.
●
If source disconnected ,it will display "No Signal".
●
It is released automatically for no operation in 3 minutes.
SOUND MODE
Select sound level by pressing SOUND MODE button on Remote Control.
Standard
Normal sound state preset on LCD TV.
Select this mode for talk programme.
Select this mode for music programme.
Select this mode for user to call out the preset sound
adjustment in SOUND menu.
News
Music
Personal
Select this mode for film programme.
Theater
SLEEP TIMER
Press SLEEP TIMER button repeatedly to select "Off", "10min", "20min",
"30min", "60min", "90min", 120min", "180min" or "240min", shown as
Picture 1.
Once SLEEP TIMER has been set, TIMER indicator is light,and the timer
will display on the screen to start countdown for 1 minute, shown as Picture
2. And the LCDTV will shift to Stand by status.
Picture 2
Picture 1
To Next Page
Loading...
Need help?
General
