TV SETTING
SETTING COLOUR SYSTEM
In case of abnormal sound, you may try to adjust the sound system.
Press◄or►buttontoselect AUTO, PAL or SECAM until
the proper colour effect is reached.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight System-C item.
Press RED button to save.
3
SETTING SOUND SYSTEM
Normally it is unnecessary to set colour system. However, if abnormal colour occurs, you may try to
adjust the colour system.
Press◄or►buttontoselect DK, I or BG until the proper
sound effect is reached.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight System-S item.
Press RED button to save.
3
Fine-Tune is not necessary under normal conditions. However, in area of inferior broadcast condi-
tions where adjustment is necessary for a better picture and sound effect, use Fine-Tune.
FINE TUNING
Press◄or►button to finetuneuntilthebestpossible
picture and sound are obtained.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight Fine-Tune item.
Press RED button to save.
3
Used to remove unwanted channels from the channel scanning memory.
SKIP
Press
▲
or
▼
button to select Skip item. Press◄or►button
to select Yes.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight Current CH item. Press◄or►buttonto
select a channel positon in which you want to skip.
Press RED button to save. The Channel set as SKIP will
not appear when pressing CHANNEL UP(▲) or CHANNEL
DOWN(▼) button.
3
To Next Page
Loading...
Need help?
General
