Sanyo LCD-40E40F - Software Update Instructions

13
7-5 HDMI terminal
Input HDMI signal (VG849 signal generator), separately input the signals listed in table4 and table5 and check the
display and sound (32 KHz, 44.1 KHz, 48 KHz) at any situation (power on, channel switch and format convert,
etc.)
7-6 other functions check
a) Check the turn on/turn off timer, sleep timer, picture/sound mode, OSD, stereo and analog TV Teletext, etc.
8. Software instruction
Update S/W tool
Tools setting.
Connector to PC and VTV_T42006 use USB cable
Connect VTV_L32020 and VTV_T42006 use special VGA cable.