Setting Child and Rating Locks (continued)
Setting parental ratings - digital only -
To set and enable parental ratings
Some digital broadcasters rate their programmes according
to age. You can set your TV to display only programmes with
age ratings higher than your child’s age. Before setting
parental ratings, you have to enable the lock system.
SELECT
MOVE
MENU
RETURN
Set Password
Block Programme
Lock System
On
Restore Factory Default
Allow Update
Off
Parental Guidance
No Block
PICTURE SOUND TIME OPTION LOCK CHANNEL
1
Use password to access LOCK menu, highlight Lock
System and use 3or4to select On to enable the lock
system.
2
Press 5or6 to highlight the Parental Guidance,
use3or4to select an age rating. All programmes
beyond the selected age rating will be blocked.You can
select:
! Block All
! Block G and above
! Block PG and above
! Block M and above
! Block MA and above
! Block AV and above
! Block R and above
! No Block
Restoring factory default
To restore factory default
Caution: When you restore factory default, all settings
including password will be cleared and reset to default
(the password is reset to 0000). So make sure you do
want to reset the settings to its original factory
condition before you perform this operation.
1
Navigate to the Lock menu and input the correct
password to access.
2
Press 5or6to select the Restore Factory Default
item, and then press 4 or OK.
A message appears prompting you to confirm again.
3
4
Press MENU to return to previous menu. Press EXIT to close the menu directly.
SELECT
MOVE
MENU
RETURN
Set Password
Block Programme
Parental Guidance
No Block
Lock System
Off
Allow Update
Off
Restore Factory Default
Are you sure?
NoYes
PICTURE SOUND TIME OPTION LOCK CHANNEL
Use 3or4to select between YES (to reset) or NO (to cancel) item, and press OK to confirm.
Setting Allow Update
To set Allow Update
When the TV is in standby mode, the TV will automatically
work at the preset time and detect OTA, then start system
update.
1
Navigate to the Lock menu and input the correct
password to access.
2
Press 5or6to select the Allow Update item, press 4
or OK to access its setting menu.
3
5
When finished, use 5or6to select Close and press OK to close the sub-menu. To exit, press EXIT button.
Now the Activate item is highlighted automatically,
press 3or4to select On to enable the function (To
cancel, select Off ).
SELECT
MOVE
MENU
RETURN
Set Password
Block Programme
Parental Guidance
No Block
Lock System
Off
Restore Factory Default
Allow Update
Off
Activate
On
Close
Hour
00
Minute
00
PICTURE SOUND TIME OPTION LOCK CHANNEL
4
After Activate is set to On, press 5or6 to go through Hour/Minute item and use 3or4 to set update time.
28
G (General Audiences): Content not offensive to
most viewers.
PG (Parental Guidance Suggested): Content is such
that parents may not want their children to view the
programme.
M (Mature Audience): Suitable for mature audience.
MA(Mature Adult Audience): May contain mature
themes, profane language, graphic violence, and sexual
situations.
AV (Adult Audience): Strong violence.
R (Restricted viewing): Not for children under age 17.
Strong elements of sex and/or violence.
3
Press MENU to return to previous menu.
Press EXIT to close the menu directly.
To Next Page
Loading...
Need help?
General