Basic Operations (Continued)
16
Displaying the Information Banner
Press the INFO button to display the information banner. The information banner displays current status information such as
the channel number and signal source.
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an
example banner in DTV mode.
=
The above OSD is only served as an example, and it is in DTV mode.
=
Information banner content varies, depending on the broadcaster and your settings.
In DTV mode, the information banner may contain:
! Channel number and name.
! Current time.
! Current program name, start and end play times.
! Next program name and start and end play times.
! TV or Radio.
! Audio mode, audio track.
! Signal strength for current channel.
! Signal resolution.
! Subtitle, teletext.
Selecting the Input Signal Source
Note
2 ABC TV Sydney
MPEG SD
DTV
11:08British Isles: A Natural History
Reserved for future use
Fri, Feb 27 2008
11:05NZDT
12:00NZDT
Subtitle
English
Teletext
576i
Alan Titchmarsh continues his epic journey around the British Isles
and discovers why they are so diverse.
Next
Freezing the Picture
Press the FREEZE button to freeze the image on the screen (the video sources still run). Press it again to reactivate the image.
=
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
Therefore do not freeze the picture for a long time.
=
In some mode, the FREEZE function can not work.
Note
1
2
3
Press SOURCE button.
Press 3,4 or OK to confirm the selection.
Press 6or 5to select the input source. Options include:
Select
Move
DTV
AV1
AV2
D-SUB
HDMI1
HDMI2
Input Source
ATV
S-Video
Component1
Component2
HDMI3
! DTV — Watch the DTV signal.
! ATV — Watch the ATV signal.
! AV1 — Watch the signal from the AV1 input terminals.
! AV2 — Watch the signal from the AV2 input terminals.
! S-Video — Watch the signal from the S-VIDEO input jack.
! Component1 — Watch the signal from the COMPONENT1 input terminals.
! Component2 — Watch the signal from the COMPONENT2 input terminals.
! D-SUB — Watch the signal from the D-SUB input jack.
! HDMI1 — Watch the signal from the HDMI1 input jack.
! HDMI2 — Watch the signal from the HDMI2 input jack.
! HDMI3 — Watch the signal from the HDMI3 input jack.
To Next Page
Loading...
Need help?
General
