Sanyo MDF-U500VX - Various Settings (MENU;Tools); Setting Door Alarm Delay Time

- 92 -
28
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
1
D a t e T i
m
e
3
D a t e 0 9 / 1 2 / 0 1 ( YY/
M
M/DD)
4
T i
m
e 1 2 : 0 0 : 0 0 ( h h
䋺
m
m
䋺
s s )
5
㩷
D oor
㩷
D e l a y 2min (1-15min)
㩷
L o g I n t e r v a l 1 5
m
in (2-30
m
in)
6
C o
m
p D e l a y 3
m
in (3-15
m
in)
VARIOUS SETTING (MENU/Tools)
Set of date, time, log interval (Tools/Date Time)
A date, time and a Log interval configuration screen (Date Time) are chosen on the basic screen (Select
Tools). Then, each parameter is set up on the date, time setup screen (Date Time䋩.
Each parameter setting range:
1. Date: Present date is indicated. (Example : in case of December 1, 2009) (Refer to a table 10.)
2. Time: Present time is indicated. (Example : in case of 12:00:00) (Refer to a table 10.)
3. Door Delay: The variable range of the door alarm delay is 1 to15 minutes. (Factory setting is 2
minutes.) (Page 30 Refer to a table 11)
4. Log Interval: Settable between 2 minutes and 30 minutes. (Factory setting is 15 minutes.) With 15
minutes interval, recording for about 5 weeks is available.
5. Comp Delay: Delay time for high temperature side/low temperature side compressor after power
failure. The settable range is between 2 minutes until 30 minutes. (Factory setting is 3 minutes.)
Table 10 Setting of date and time (When time is set up at 12:00:00 on December 1, 2009 )
Description of operation Key operated Indication after operation
1 -----
The top screen displayed
2
Press the MENU key.
MENU
The menu window is indicated. And the
“set” is highlighted.
3
Press the ENTER key.
The temp. setting window indicated.
4
Select Date Time item pressing Shift
keys.
A menu window is indicated, and the log of
Date Time is highlighted.
5
Select Ring Back item pressing
MENU key. Then, pressing ENTER
key
The Date Time setting window indicated.
6
The number input key is pressed in
order of 0 ĺ9ĺ1ĺ2ĺ0 ĺ1.
The numerical value of the date is
changed to 09/12/01.
7
Select Time item pressing Shift
keys.
Time (Time) highlights.
8
The number input key is pressed in
order of 1ĺ2ĺ0ĺ0ĺ0ĺ0.
The numerical value of the time (Time) is
changed at 12: 00:00.
9 Press the MENU key. MENU
The menu window is indicated. And the
“OK” is highlighted.
10 Press the ENTER key. ENTER
Date time is memorized, and the top
screen window is indicated.
1
2
3
4
5
0
9 1 2
0 1
1 2 0
0
0
0
MENU
ENTER
ENTER