Sanyo MDF-U5486S - Table of Contents

- 43 -
1
CONTENTS
INTRODUCTION P. 2
PRECAUTIONS FOR SAFE OPERATION P. 3
ENVIRONMENTAL CONDITIONS P. 7
FREEZER COMPONENTS P. 8
Control panel P.10
INSTALLATION SITE P.11
INSTALLATION P.12
START-UP OF UNIT P.13
CHAMBER TEMERATURE SETTING P.14
KEY LOCK FUNCTION P.14
ALARM TEMPERATURE SETTING P.15
SETTING OF ALARM RESUME TIME P.16
REMOTE ALARM TERMINAL P.17
AIR INTAKE PORT P.17
CHANGE OF COMPRESSOR DELAY TIME P.18
ALARMS & SAFETY FUNCTIONS P.19
ROUTINE MAINTENANCE
Cleaning of cabinet P.20
Cleaning of condenser filter P.20
Defrosting of inside wall P.21
Cleaning of air intake port P.22
TROUBLESHOOTING P.23
DISPOSAL OF UNIT P.24
Recycle of battery P.24
DISPOSAL OF BATTERY P.25
BACK-UP SYSTEM (OPTION) P.26
TEMPERATURE RECORDER (OPTION) P.27
Installation of MTR-G85 P.27
INTERFACE BOARD (OPTION) P.27
Installation of MTR-480/MTR-L03 P.27
INVENTORY RACK (OPTION) P.28
SPECIFICATIONS (MDF-U5486S/SC) P.29
SPECIFICATIONS (MDF-U7486S/SC) P.30
PERFORMANCE P.31
SAFETY CHECK SHEET P.32