Sanyo MDF-U5486S - ENVIRONMENTAL CONDITIONS

- 49 -
7
ENVIRONMENTAL CONDITIONS
This equipment is designed to be safe at least under the following conditions (based on the IEC 61010-1):
 Indoor use;
 Altitude up to 2000 m;
 Ambient temperature 5
o
C to 40
o
C
 Maximum relative humidity 80% for temperature up to 31
o
C decreasing linearly to 50% relative humidity
at 40
o
C;
 Mains supply voltage fluctuations not to exceed 㼼10% of the nominal voltage;
 Other supply voltage fluctuations as stated by the manufacturer;
 Transient overvoltages according to Installation Categories (Overvoltage Categories) II; For mains
supply the minimum and normal category is II;
 Pollution degree 2 in accordance with IEC 60664.