36
INDEPENDENT INNER DOOR (OPTION)
There is an independent inner door (MDF-7ID1) of the shelf width of the chamber in this product by the
option. The user divided into every shelf of the chamber is to change a standard independent inner door
to MDF-7ID1. Refer to an attached installation manual for the installation of MDF-7ID1 in the
independent inner door.
Note:
Be careful because this manual (Page 39 ”PERFORMANCE”) can cool down a cooling performance
more than mention when the put an independent inner door (MDF-7ID1).
Cooling performance : -82
o
C at the center of the chamber (ambient temperature; 30
o
C, no load)
Set it up by more than +5℃ to the lowest set temperature when the use in a long time.
Optional inventory rack IR-224U cannot be used when an independent inner door is installed.
INTERFACE BOARD (OPTION)
Installation of MTR-480/MTR-L03
Contact SANYO sales representative or agent for the attachment of a interface board. :
Note:
＊ When a data transmitting function to the personal computer is done, an interface board MTR-480
(option goods) and communication cable of 9 pin Dsub cross type for RS232C are necessary.
＊ The connecting cable between the PC and MTR-L03 terminal is not enclosed. Provide a cross type
cable of less than 100 m length having a pin plug.
To Next Page
Loading...
