Sanyo PDG-DWL2500 - Connecting to a Computer

-16-
Mechanical Disassembly
v Power and FanNet Board and fan(FN905) removal
Fig.4
1. Remove 2 screws A(M3x8) to remove the FanNet board.
2. Remove 4 screws B(M3x8) to remove the Power box cover.
3. Remove 2 screws C(M3x8) and 1 screw D(M3x8) to remove the Power board and insula-
tion sheet.
4. Remove 4 screws E(M3x8) to remove the Power box frame assy.
A
A
B
B
B
C
C
D
E
E
E
(M3x10)x3
B
Power Board
FanNet Board
Power box cover
Insulation sheet
Power box frame assy
FN905
E
Gasket
Label side