Sanyo PDG-DWL2500 - Connecting to Component Video Equipment

-18-
Mechanical Disassembly
n Line Filter Board removal
1. Remove 2 screw A(M3x6) to remove the Focus lever cover.
2. Remove 3 screws B(M3x8) to remove the Line filter shield.
3. Remove 4 screws C(T3x8) to remove the Line filter board and insulation sheet.
B
Focus lever cover
Line filter shield
Fig.6
B
B
A
C
C
C
C
Insulation sheet
Line filter board
Spacer
sheet
(M2.6x6)x1
A