Sanyo PDG-DXL100 - Section 2: 8051 Firmware Upgrade Procedure; Equipment Needed

PDG-DXL100 Condential
5-8
Section 2: 8051 Firmware Upgrade Procedure
5-2-1 Equipment Needed
Software: (DDP 2230)
- Setup _NLINK_en
- Manley USB Driver_NLINK
- PDG-DXL 100_8051_xxx.hex
Hardware:
- Projector
- Power Cord: CH4200105G011 (US Type)
CH4200120G011 (EU Type)
CH4200110G011 (UK Type)
- Mini USB Cable
- NLINK Cable
- NLINK Fixture
- PC or Laptop