Sanyo PDG-DXL100 - Section 4: Lamp Driver Waveform Download; Waveform Download

PDG-DXL100 Condential
5-18
5-4 Waveform Download
- Plug in the power cord
- Hold on "Input" and "Enter" buttons, then
press "Power" button.
- After several seconds, the Temp LED and
Lamp LED will light red, then loosen "Input"
and "Enter" buttons.
- After 5 seconds, the Temp LED and
Lamp LED will ash red.
- Waveform Download is completed.
Waveform Download
Input button
Enter button
Section 4: Lamp Driver Waveform Download