Why does the LAMP REPLACE indicator light up yellow on my Sanyo PLC-WL2500?
When the LAMP REPLACE indicator lights up yellow on your Sanyo Projector, it means the projection lamp is nearing the end of its life. Replace the projection lamp with a new one as soon as possible. After replacing the lamp, remember to reset the lamp replacement counter.
What to do if my Sanyo PLC-WL2500 Projector cannot be turned on due to high temperature?
If your Sanyo Projector cannot be turned on due to abnormally high temperature inside the projector, wait for it to cool down. Once the temperature returns to normal, the POWER indicator will stop blinking, and you will be able to turn on the projector.
What to do if my Sanyo PLC-WL2500 cannot be turned on until cooling is completed?
If your Sanyo Projector cannot be turned on until cooling is completed, it means that the projector is either preparing for stand-by or the projection lamp is cooling down. Please wait until the cooling process is completed and the POWER indicator stops blinking before attempting to turn it on.
How to turn on Sanyo Projector if it is in stand-by mode?
To turn on your Sanyo Projector from stand-by mode, simply press the ON/STAND-BY button.
General| Brightness | 2500 ANSI Lumens |
|---|---|
| Display Type | LCD |
| Native Resolution | XGA |
| Resolution | 1024 x 768 (XGA) |
| Lamp Life | 3000 hours (Eco mode) |
