Need help?Do you have a question about the Sanyo PLC-WL2503 and is the answer not in the manual?
General| Brightness | 2500 ANSI Lumens |
|---|---|
| Contrast Ratio | 2000:1 |
| Display Type | LCD |
| Projection Technology | 3LCD |
| Projection Size | 30 - 300 inches |
| Aspect Ratio | 16:10 |
| Native Resolution | WXGA (1280x800) |
| Lamp Life | 2000 hours (normal mode), 3000 hours (eco mode) |
| Lamp Type | UHP |
| Input Ports | VGA, S-Video, Composite Video |
Guides on how to position the projector and use adjustable feet for optimal placement.
Provides instructions and diagrams for connecting the projector to a computer.
Details how to connect various video sources like VCRs and DVD players.
Explains the process for connecting component video sources for higher quality.
Instructs on proper AC power cord connection, including regional considerations.
Step-by-step guide for powering the projector on and off, including Direct OFF function.
How to select input sources and manage lamp status indicators.
Details how to navigate and use the projector's on-screen menu system.
Explains the functions of various buttons on the remote control.
How to select Computer 1 or Computer 2 as the input source.
Covers auto and manual adjustments for PC input to optimize picture quality.
Covers adjustments for contrast, brightness, color, tint, and white balance for video.
Explains projector status indicators and troubleshooting for shutdown conditions.
Instructions for replacing the projector filter and resetting the filter counter.
Steps for replacing the projector lamp and how to order replacements.
Procedures for resetting the lamp counter after replacement.
Provides solutions for common problems encountered with the projector.
Instructions for physically connecting the projector to the LAN.
Detailed steps for configuring network settings like IP address and DHCP.
Accessing the projector's configuration interface via a web browser.
Explains different input methods (text, dropdown, radio, checkbox) for settings.
Configuring email alerts for projector status and abnormalities.
Remotely managing projector power and checking its operational status.
Adjusting image parameters like contrast, brightness, and color via network.
Fine-tuning PC input signals and image parameters remotely.
Configuring screen modes, ceiling/rear settings, and other projector options.
To Next Page
