41
ENGLISH
Setting up the projector
Item Description
Key lock..................Sets the prohibition of controls either
Projector or Remote control. (OFF,
Projector keys, Remote control)
Fan control
.............Sets the fan control speed.
OFF Normal mode
ON1 Highland mode 1
ON2 Highland mode 2
Lamp Corres.
Value(h)..................Displays the lamp use time
(Corresponding value) . Reset the time
after lamp replacement. Click "Reset", a
confirmation display appears, and then
click "OK", the time will be reset.
Filter counter......Displays the filter counter. Reset the time
after filter replacement. Click "Reset", a confirmation display appears, and then click
"OK", the time will be reset.
Filter warning
.....Sets the time to indicate the filter warning message on the screen. (OFF, 2000H,
3000H, 4000H)
Factory default
...Sets all of the projector control items to the factory default setting except the fol-
lowing items.
User Logo, Log PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time
* This function is effective for all the Network settings.
No show.................Sets the black out image temporarily. (ON, OFF)
Freeze......................Sets the image to freeze mode. (ON, OFF)
Closed caption..Sets the closed caption function.
Closed caption
...Sets the closed caption mode. (OFF, CC1, CC2, CC3, CC4)
Color .....................Sets the color of the contents. (Color, White)
Setting 3
To Next Page
Loading...
Need help?
General