Need help?Do you have a question about the Sanyo PLC-WXU300 and is the answer not in the manual?
General| Vertical scan range | 50 - 100 Hz |
|---|---|
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 500:1 |
| Screen size compatibility | - \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | ±30 ° |
| Aspect ratio | 16:10 |
| RS-232 ports | 1 |
| Compatibility | UXGA SXGA SXGA+ WXGA XGA SVGA VGA WXGA+ WSXGA+ WUXGA |
| Dimensions (WxDxH) | 326 x 265.2 x 92.6 mm |
| Power requirements | 100 - 240 V |
| F-number (relative aperture) | F = 1.65 - 2.33 |
| Lamp type | UHP |
| Lamp power | 225 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 2500 h |
| Headphone outputs | 2 |
| Serial interface type | RS-232 |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 291 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Weight | 2800 g |
|---|---|
| Package weight | 5600 g |
