Sanyo PLC XU115 - XGA LCD Projector

10
Memory viewer function
Duplicating the data into the SD memory card for Windows
It isdescribedhowtoduplicatethe dataconvertedwiththeNetworkViewer5 [FileConverter1,File
Converter2]intotheSDmemorycardthroughthenetwork.
1.LaunchtheexplorersoftwareofthecomputerandtypetheIPaddressoftheprojectorwhichhasthe
SDmemorycardontotheaddresscolumn.Forexample,"ftp://192.168.1.201".
The contents of the SD memory card appear on the explorer window as below.
2.MovetheprojectiondatafromthecomputerintotheSDmemorycard.
Note:
If the network PIN code is set for the projector, the authentication window appears as below. In that
case, enter "user" into the User Name column and the network PIN code of the projector into the
Password column. *User Name must be "user".