Sanyo PLC XU115 - XGA LCD Projector

5
Entering the memory viewer mode
1.Select“Wired”or"Wireless"fromtheinputmenuoftheprojector.The“Pleasewait...”messagewillbe
displayed on the screen. After short time, the network connection standby display screen "Ready for
use" will appear.
2.InserttheSDmemorycardintothecardslotonthebacksideoftheprojector.Thecardindicator
lights up.
3. Select “Wired setting” or "Wireless setting" in the projector menu, and press SELECT button.
4. Select "Memory Viewer" with the point ed button and press SELECTbutton.The"Enter/Exit"pallet
of the memory viewer appears.
5.Select"Enter"andpressSELECT button. The memory viewer start-up image appears briefly and an
image stored in the SD memory card is displayed on the screen.
* If the image file is not available in the root directory of the SD memory card, the memory viewer
browser window appears.
Memory viewer
Wireless setting
Wired setting