Sanyo PLC-XW55A User Manual

Basic Operation
20
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
Press the Point 7 8 buttons to select a Menu icon
to adjust and press the Point ed buttons to select
an item to adjust.
Press the SELECT button to show the item data.
To adjust the data, press the Point 7 8 buttons.
Refer to the following pages for each adjustment.
To close the On-Screen Menu, press the MENU
button again.
Press the MENU button to display the On-Screen
Menu.
✔ Note:
The selected item is not active until the SELECT
button is pressed.
1
2
3
Top Control
MENU button
SELECT button
SELECT button
POINT buttons
Remote Control
MENU button
Menu bar
Pointer
(red framed )
Menu icon
Item data
Press the Point 7 8
buttons to adjust the
value.
SELECT
button
Pointer (red framed )
Press the Point ed buttons to
move the pointer.
Item
On-Screen Menu
Quit
Exit this menu.

Sanyo PLC-XW55A Specifications

General

Brand	Sanyo
Model	PLC-XW55A
Category	Projector
Language	English