Sanyo PLC-XW65K User Manual

31
Computer Input
Select an image level among Dynamic, Standard, Real,
Blackboard (Green), Colorboard, Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the
remote control.
Normal picture level preset on this projector.
Picture level with improved halftone for graphics.
Standard
Real
Image 1 ~ 4
Image Level Selection
Direct Operation
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This mode assists to enhance the image
projected on a blackboard. This is mainly effective on a
green colored board, not truly effective on a black colored
board.
Picture level suitable for viewing picture in a bright room.
Dynamic
User preset image in the Image Adjust Menu. (p.34)
IMAGE button
Image 4
Blackboard (Green)
Remote Control
IMAGE button
Dynamic
Standard
Real
Image 1
Image 2
Image 3
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Colorboard

Sanyo PLC-XW65K Specifications

General

Contrast Ratio	2000:1
Display Technology	3LCD
Aspect Ratio	4:3
Projection Size	30 to 300 inches
Resolution	1024 x 768 (XGA)
Lamp Life	2000 hours (Normal mode), 3000 hours (Eco mode)
Input Ports	HDMI, VGA, Composite Video, S-Video
Lamp Type	UHP
Output Terminals	VGA Out
Noise Level	37 dB (Normal mode), 32 dB (Eco mode)