Need help?Do you have a question about the Sanyo PLV-Z700 and is the answer not in the manual?
General| Projection technology | LCD |
|---|---|
| Contrast ratio (typical) | - |
| Resolution | 1920 x 1080 pixels |
| Aspect ratio | 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 400 x 346 x 154 mm |
| Lamp type | UHP |
| Lamp power | 165 W |
| Light source type | Lamp |
| Service life of light source | 2000 h |
| Service life of light source (economic mode) | 3000 h |
| Serial interface type | RS-232 |
| Component video (YPbPr/YCbCr) in | 2 |
Weight and Dimensions| Weight | 7500 g |
|---|
Ensure projector is properly earthed to prevent fire or electric shock.
Procedures for safe ceiling mounting to prevent damage.
Avoid environments that can cause breakdown or disaster.
Follow operational guidelines, avoid hazards like water and unauthorized accessories.
Ensure proper electrical connections and grounding to prevent shock hazards.
Unauthorized servicing can lead to hazards; use only authorized technicians and parts.
Ensure adequate airflow and proper positioning for safe operation.
Guidelines for safe ceiling mounting and careful handling during movement.
Guidelines for using appropriate AC power cords for different regions.
Status lights for power, warnings, and lamp replacement.
Buttons for menu navigation, input selection, and power control.
Buttons for basic operation, menu navigation, input selection, and screen size.
Guide to proper battery installation and safe usage practices.
Details projection range and screen size compatibility for various zoom levels.
Adjusts image position left/right and up/down using dedicated rings.
Guides connection of composite video (RCA) and S-video cables.
Instructions for connecting component video (Y, Pb/Cb, Pr/Cr) cables.
Instructions for connecting HDMI and RGB Scart video sources.
Guides connection of PC signals using VGA or DVI-VGA cables.
Guides the physical connection of the power cord to the projector.
Details the need for region-specific power cords and safe outlet usage.
Step-by-step guide to powering on the projector.
How to safely turn off the projector and its confirmation process.
Information on cooling fans, lamp life, and usage restrictions.
Step-by-step guide on how to use buttons to select and access menu items.
Covers image mode selection and detailed image adjustments.
Adjusting picture position, sync, and display aspect ratio.
How to adjust image size and sharpness using physical controls.
Buttons for selecting and fine-tuning image modes and parameters.
Explains the various states indicated by the WARNING light.
Recognizing lamp end-of-life and safety guidelines for handling.
Step-by-step guide for replacement and how to order a new lamp.
Warnings on lamp lifetime, explosion risk, and safety procedures.
Solutions for common operational problems like power, image display, and focus.
Explains the various states indicated by the projector's lights.
A comprehensive overview of projector status based on indicator lights.
To Next Page
