Sanyo SCP-3200 - Adding a New Contact to Your Personal List; Editing a Contact in Your Personal List

154 Section 2I: Using Sprint Ready Link
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Sprint Ready Link contact:
1. Press .
2. Select Go to > Personal List > Add Contact.
– or –
Select a contact and press
Options (right softkey) >
Add Contact
.
3. Enter a name for the new contact and press . (This is
the name you will see when calling or receiving a call
from the contact.)
4. Select R-Link Number, enter the contact’s 10-digit
Sprint Ready Link number (the contact’s wireless phone
number), and press .
5. Select Save (left softkey) to save the new contact to your
Personal List.
Editing a Contact in Your Personal List
To edit a Personal List contact:
1. Press .
2. Scroll to the entry you want to edit and press Options
(right softkey).
3. Select Edit.
4. Select the field you want to edit (Name or
R-Link Number), and press .
5. Edit the entry, press OK (left softkey), and press Save(left
softkey) to save your changes.
Tip:
You are not allowed to use the following symbols during step
3: @ : ; / * ) (.