Sanyo SCP-3200 - Setting the Current Time

74 Section 2B: Controlling Your Phone’s Settings
Setting the Current Time
To set the current time when you are roaming in an area with no
digital network:
1. Select >Settings > Others > Set Time/Date.
2. Set the current time and date and press .
Setting the Open/Close Flip Option
This feature enables you to answer an incoming call by
opening the phone or to end a call by closing the phone.
To activate the Open Flip feature:
1. Select >Settings > Others > Open/Close Flip.
2. Select Open.
3. Select Answer Call.
n
To deactivate this feature, select No Action.
To activate the Close Flip feature:
1. From step 2 above, select Close. (You will see a message
on the display.)
2. Press OK (left softkey) to continue.
3. Select an option from the following and press .
n
End to end the call.
n
Go On (Mute) to continue the call. Your voice is
muted; however, you can hear the caller’s voice from
the speaker.
n
Go On (Unmute) to continue the call. You can hear the
caller's voice and speak to the phone to answer.
Note:
The Close Flip feature does not apply during Ready Link calls or
when you are using the speakerphone, a headset, or a car kit.
Note:
This feature is available only when you are in an area with no
digital network available.