Sanyo SPW-CR903GDCH8 - Page 115

Control of W-ECO MULTI SYSTEM
3
TD831077
III - 57
❚
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
1059_1143
❚
2 Press DAY button, and bring the operation reserva-
tion indicator “ ” at the day to be checked.
¶ Every time the DAY
button is pressed, the
operation reservation
indicator “ ” starts
flashing, and the
operation times of the
day where the operation
reservation indicator
“ ” is located are
displayed.
3 Press CHECK button
Regular display is restored.
1. If a button other than the DAY, CHECK, and PRO-
GRAM is pressed while checking, the display does
not change.
2. While checking, if 30 seconds elapse without press-
ing of the DAY, CHECK, or PROGRAM button,
regular display is automatically restored.
(G)Changing the program operating time
1 Beginning from regular display, press the PROGRAM
button.
2 Press DAY button, and bring the operation reserva-
tion indicator “ ” at the day to be revised.
3 Press SET button.
4 Pressing SET repeatedly moves the flashing position
in the following order. Adjust it at the time to be
changed.
5 Change the time with the HH. and MM. buttons.
6 Press SET button.
7 Finally, complete the revision by pressing the
PROGRAM button.
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
1060_1143
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
1061_1143
❚
❚
❚
CHECK
CANCEL
CLEAR
PROGRAM
DAY
HH
MM
SET
Su Mo Tu We Th Fr Sa
PROGRAM ERROR
OFFON
PROGRAM 1
PROGRAM 2
PROGRAM 3
CLOCK
1062_1143
❚
❚
(E) Copying the program operating time
At the time of setting program operation, if the operating
time to be set is the same as that an already set
another day, it can be copied here.
Ex: To copy the operation of Monday at the operation
of Tuesday
1 Press CHECK button while in the state of regular
display.
2 Press DAY button, and bring the operation reserva-
tion indicator “ ” at the day (Mon. in the example)
whose program operation has been already set.
3 Press the PROGRAM button.
Current day indicator “∞”
and operation reservation
indicator “ ” start flashing.
4 Press DAY button, and bring the operation reserva-
tion indicator “∞” at the day (Tue. in the example)
whose program operation is to be set.
(To copy continuously, press the SET button, then
press the DAY button, and repeat the process).
5 Press the PROGRAM button.
The operation reservation indicator “ ” turns ON
below the copied day.
(F) Checking the program operating time
1 Press CHECK button.
Ex:
To check the program
operating times of Wednes-
day, on Monday
¶ The operation reserva-
tion indicator “ ” starts
flashing, beginning from
the state of regular
display.
❚
NOTE
2. Optional Controller (weekly timer)