Sanyo VHR-M261EV - Specifications

1-6
SPECIFICATIONS
General
Power : 200~240V, 50Hz
Power consumption : Approx. 14 watts(Energy Saving mode : 3 watts)
Video Head system : Rotary 2 heads, helical scanning system
Tape speed : PAL/MESECAM : 23.39 mm/s (SP mode)
11.69 mm/s (LP mode)
NTSC (Playback only) : 33.35 mm/s (SP mode)
16.67 mm/s (LP mode)
11.12 mm/s (EP mode)
Tape format : Tape width 1/2” (12.7 mm high density VHS tape)
Maximum recording time : 4 hours in SP mode/8 hours in LP mode (with E-240 tape)
Rewind time : Approx. 150 sec. (with E-180 tape)
Dimensions (W X H X D) : 14.2” X 3.6” X 11.4” (360 x 94 x 270 mm)
Weight : 9.0 lbs. (4.0 kg)
Operating temperature : 41°F-95°F (5°C-35°C)
Operating humidity : Less than 80%
Timer : 24 hours display type
Video
Television system : CCIR standard (625 lines, 50 fields)
PAL(B/G) colour signal(VHR-M271SP/M261EV/M291EV)
PAL(I) colour signal(VHR-M291E)
PAL(I/I) colour signal(VHR-M291IR)
Recording format : PAL
RF Out : G(VHR-M271SP/M261EV/M291EV)
I (VHR-M291E/M291IR)
RF Modulator : UHF 22-68 (Adjustable)
Input level : VIDEO IN (SCART type)
1.0 Vp-p, 75 ohm, unbalanced
Output level : VIDEO OUT (SCART type)
1.0 Vp-p, 75 ohm, unbalanced
Signal to noise ratio : More than 43 dBm
Audio
Input level : AUDIO IN (SCART type)
-3.8dBm, more than 10kΩ
Output level : AUDIO OUT (SCART type)
-3.8dBm, less than 1kΩ
Audio track Mono track
Audio signal to noise ratio : More than 43 dBm(at SP mode)
• Design and specifications are subject to change without notice.