Sanyo VPC-CG88 - Exposure Compensation

99 English
Exposure compensation
By assigning the exposure compensation operation shortcut to the SET button
(pages 124
and 127) , you can make the image lighter or darker when
capturing images.
1 Assign the operation shortcut to
the SET button (pages 124 and
127).
2 Press the SET button to which
the operation shortcut was
assigned.
h
The exposure compensation bar
appears.
3 Toggle the SET button to the left
or right to adjust the exposure.
h
The exposure compensation
numerical value is shown at the
left end of the exposure
compensation bar.
h The exposure compensation
can be set to a value from
–1.8 EV to +1.8 EV.
h The exposure compensation bar
is canceled when the MENU
button or the SET button is
pressed.
7112 001:00:05
Full-HD 14 M
-
S
Exposure compensation bar
Pointer
SET button