Sanyo VPC-CG88 - Shortcut Setting

127 English
Shortcut setting
Assign functions (operation shortcuts) to the SET button when it is toggled
up, down, left or right when the Recording Screen is displayed.
1 Select “SHORTCUTS”, and
press the SET button.
: Assign the function when the
SET button is toggled up.
: Assign the function when the
SET button is toggled down.
: Assign the function when the
SET button is toggled to the
left.
: Assign the function when the
SET button is toggled to the
right.
RECOMMENDED SETTINGS:
The most commonly used
settings are automatically
assigned.
2 Select the SET button operation to which you wish to assign the
function, and press the SET button.
h The screen to assign a function to the key appears.
OFF: No operation shortcut is assigned to the key.
p AF LOCK: Lock the focus (page 64).
P AE LOCK: Lock the exposure setting (page 64).
+ FOCUS: Set the focus range (pages 60 and 90). (This operation
shortcut can be assigned only to the or key.)
m FLASH: Set the flash operation (pages 44 and 66).
) EXP COMPENSATION: Adjust the exposure (page 99).
s ISO: Set the ISO sensitivity (pages 50 and 92).
O SEQUENTIAL: Switch between sequential shots and single shots.
O SELF-TIMER: Set the self-timer (pages 48 and 88).
H EXPOSURE: Set the exposure value for the exposure setting
(pages 52 and 94).
DISP. ON/OFF: Turn the shooting settings display on/off.
SHORTCUTS
RECOMMENDED SETTINGS
OFF
OFF
OFF
OFF
OK
SET button