To Next PageTo Next PageWhy is a part of the image missing in my Sanyo Xacti VPC-C4?
If a part of the image is missing when using your Sanyo Camcorder, the neckstrap or a finger was blocking the lens or lens opening. Hold the camera correctly, and make sure the lens is not obstructed.
Why does the flash not operate on my Sanyo Xacti VPC-C4?
If the flash on your Sanyo Camcorder isn't working, there are a couple of things to check. First, make sure you haven't accidentally selected the flash off mode. If so, switch to automatic or forced flash mode. Also, a dead battery pack will prevent the flash from operating, so try recharging or replacing the battery pack.
What to do if my Sanyo Xacti VPC-C4 image is too dark?
If your Sanyo Camcorder image is too dark, ensure that your finger or another object isn't blocking the flash. Also, the subject may be too far away, so try to capture the image within the flash's operational range. If the subject is lit from behind, use the forced flash mode. Additionally, try adjusting the ISO sensitivity setting to allow more light.
Why does the Sanyo Xacti VPC-C4 remote control not seem to work?
If the remote control for your Sanyo Camcorder docking station isn't working, make sure you're aiming it at the docking station's remote control sensor, within about 30 degrees horizontally. Check for obstructions between the remote and the sensor. If those aren't the issue, try replacing the remote's battery, ensuring the (+) and (–) poles are correctly oriented.
Why is my Sanyo Xacti VPC-C4 image too bright?
If your Sanyo Camcorder image is too bright, the forced flash mode might be selected; try using a different flash mode. The subject might also be too bright, so use the exposure correction function. Also, check the ISO sensitivity setting and adjust it as needed.
Why is my Sanyo Camcorder battery pack not being recharged in the AC adapter/ charger?
If the battery pack is installed in the AC adapter/ charger, but it is not being recharged for your Sanyo Camcorder, the battery pack is not correctly oriented in the AC adaptor/ charger. Position the battery pack correctly in the AC adaptor/ charge as indicated.
Why can't I edit or rotate an image on my Sanyo Camcorder?
If you cannot edit or rotate an image on your Sanyo Camcorder, the protect mode is set. Cancel the protect mode.
Why does my Sanyo Xacti VPC-C4 Camcorder have no image or sound?
If your Sanyo Camcorder has no image or sound, the digital camera is not correctly connected to the TV. Follow the instructions to make the connection correctly. Also, the TV input is not set correctly, set the input on the TV to 'VIDEO'.
Why is my Sanyo Camcorder video clip picture flickering?
If your Sanyo Camcorder video clip picture is flickering, it may be because the video clip was filmed under fluorescent lighting. Set the flicker-reduction setting to on.
Why are the colors of the images captured indoors with my Sanyo Xacti VPC-C4 Camcorder not correct?
If the colors of the images captured indoors with your Sanyo Camcorder are incorrect, it might be due to the ambient lighting. Try capturing the image using the forced flash mode. Additionally, the white balance setting might be incorrect, so set it correctly.
General| Type | Digital Camcorder |
|---|---|
| Image Resolution | 2304 x 1728 |
| Optical Zoom | 5x |
| Display | LCD |
| Storage | SD Card |
| Effective Pixels | 4.0 Megapixels |
| Video Resolution | 640 x 480 |
| Media Type | SD Card |
| Battery | Lithium ion |
Steps for initial camera setup and configuration.
Basic steps for capturing images and video clips.
Overview of fundamental shooting parameters and adjustments.
Detailed explanation of advanced shooting configuration options.
Overview of fundamental playback parameters and adjustments.
Detailed explanation of advanced playback configuration options.
Configuration options for various camera functions and behaviors.
Essential safety precautions for operating the camera itself.
Safety guidelines for using charging and docking accessories.
Important safety advice regarding camera accessories.
Safety warnings specific to the CR2025 lithium battery.
Ensuring optimal conditions for capturing significant images.
Understanding and respecting image copyright laws.
Proper procedures for cleaning the camera to prevent damage.
Avoiding interference with other electronic devices.
Guidelines for safely handling memory cards.
Identification and labeling of camera components.
Step-by-step instructions for installing the battery.
Step-by-step instructions for installing the memory card.
Procedure for powering on the camera.
Procedure for powering off the camera.
Fundamental procedures for shooting and recording.
Instructions on how to record video clips.
Instructions on how to capture still photographs.
Explanation of how to use the camera's zoom functions.
Adjusting exposure settings for optimal image brightness.
Steps for viewing captured still images.
How to zoom in on images for closer inspection.
Instructions for playing back recorded video clips.
Overview of basic shooting settings on Page 1.
Explanation of the shooting settings display layout.
Setting the quality and resolution for video clips.
Setting the resolution and quality for still images.
Detailed steps for adjusting manual focus.
Overview of basic playback settings on Page 1.
Saving segments of video clips as new files.
Removing unwanted portions from video clips.
Combining two video clips into a single file.
Saving a still frame from a video clip.
Accessing the screen for configuring print settings.
Setting date display and number of copies for prints.
Creating thumbnail index prints of captured images.
Modifying existing print configurations.
Resetting all print settings to default values.
Accessing various camera configuration options.
Explanation of the items available on the option screen.
Monitoring available space for images and video.
Monitoring available space for audio recordings.
Instructions for using the camera's docking station.
Steps to connect the camera to a computer or printer.
Steps to connect the camera to a television.
Explanation of remote control unit button functions.
Instructions for replacing the remote control battery.
Guidelines for operating the remote control unit effectively.
Procedure for changing the remote control's operating code.
Steps to prepare the camera and printer for direct printing.
Procedure for printing a single selected image.
Procedure for printing all images stored on the card.
Creating index prints of all captured images.
Printing images designated via DPOF settings.
Adjusting printer parameters like paper type and quality.
Troubleshooting issues related to camera power and operation.
Troubleshooting problems encountered during shooting.
Troubleshooting issues with the LCD monitor display.
Troubleshooting problems when viewing images.
Troubleshooting issues related to TV connectivity.
Troubleshooting problems during image editing.
Troubleshooting issues related to battery charging.
Miscellaneous troubleshooting topics and solutions.
Troubleshooting issues specific to the docking station.
Troubleshooting notes for scene select and filter functions.
Technical specifications of the camera itself.
Details on camera's digital/AV, USB, and DC IN terminals.
Information on battery performance under various conditions.
Estimated storage capacity and recording times for memory cards.
Technical specifications for the docking station unit.
Technical specifications for the remote control unit.
Specifications for the AC adaptor and charger unit.
Specifications for the rechargeable Li-ion battery pack.
Specifications for the included SD memory card.
Trademark and copyright information.
Tips for capturing better portrait photographs.
Tips for capturing sharp images of moving subjects.
Techniques for improving night photography results.
Tips for capturing scenic landscape photographs.
