English 52
Exposure correction
When capturing images, you can make the image lighter or darker.
1 Set the main switch to REC.
h To exit the Shooting Setting Screen,
press the MENU button.
2 With the Shooting Setting Screen
not shown, toggle the SET button to
the left or right.
h The exposure correction bar
appears.
3 Toggle the SET button to the left or
right to adjust the exposure.
h To cancel the exposure correction
bar, press the MENU button.
h The exposure setting numerical
value is shown at the left end of the
exposure bar. The exposure can be
set to a value from –1.8EV to
+1.8EV.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i After a Playback or Option Screen is accessed.
i When the main switch is set to PLAY.
i After the power is turned off.
12 00:00 :15
MENU button
SET button
Main switch
To Next Page
Loading...
