37 English
INSTALLING THE BATTERY PACK AND CARD
The card can be used after it has been formatted with the camera (page 129).
Make sure that the battery pack polarity (+ and –) and the card orientation are
correct.
Install the battery pack
1 Open the battery cover on the side.
h Open the battery cover by lightly
pressing it and sliding it towards the
rear.
2 Insert the battery pack.
h Firmly push it all the way in.
h Match the [I] mark on the battery
pack with the [I] mark on the
camera.
<To remove the battery pack...>
h Raise the battery pack and pull it
out.
To Next Page
Loading...
