49 English
CAPTURING IMAGES
Capturing still images
1 Turn on the camera (page 40).
2 Set the main switch to REC.
3 Press the still image shooting
button [S].
1 Press the still image shooting
button halfway.
h The autofocus operates, and
the image is focused (focus
lock).
2 Continue to gently press the still
image shooting button all the
way.
h The shutter releases and the
image is captured.
h You can view the captured
image on the LCD monitor by
keeping the still image shooting
button depressed when you
capture the image.
NOTE
About the target mark &
i The target mark indicates the position which is currently focused. If the
target mark does not appear, or if it appears at a position that is different
from the point you wish to focus, you can refocus, for example, by changing
the shooting angle.
i The large target mark appears when the camera focuses on a wide area in
the center of the screen.
Main switch
Target mark
Still image
shooting button
12
To Next Page
Loading...
