125 English
OPERATION SOUNDS
3 Select “CHANGE SETTINGS”, and
press the SET button.
h The screen to change the settings
appears.
4 Press the [T] or [W] button to select
the desired setting, and press the
SET button.
h The screen to select operation
sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Press the [T] or [W] button to select the desired setting, and press
the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can press the [H] button to preview the selected operation
sound.
h If “OFF” is selected, no sound is produced.
h Press the [T] or [W] button to select the desired setting, and press
the SET button.
<If “OPERATION VOL” is selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
(maximum).
h Press the [T] or [W] button to select the volume, and press the
SET button.
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF ON
D
A
ON
4
OPERATION BEEP
OK
OPERATION VOL
To Next Page
Loading...
