Sanyo VPC-E1 - To Select One Image and Print It (One Image)

153 English
DIRECT PRINTING
To select one image and print it (one image)
Procedure to select one image and print it.
1 Complete the print preparations (page 151).
2 Select the print 1 image icon Y,
and press the SET button.
h The screen to select images for
printing appears.
3 Press the [G] or [H] button to
display the image you wish to print.
h Specify the image to print.
4 Specify the number of prints.
1 Press the [T] button to select
“COPIES”, and press the SET
button.
2 Press the [T] or [W] button to
specify the number of prints.
3 Press the SET button.
h “PRINT” is selected.
5 Press the SET button.
h Printing begins.
HINT
To cancel printing
1 During printing, press the [W] button.
h The Confirm Cancel Printing Screen appears.
2 Select “CANCEL”, and press the SET button.
h If “EXIT” is selected and the SET button is pressed, printing resumes.
PRINT 1 IMAGE
copy:1
EXIT
PRINT
COPIES OK
100-0009
100-0009
PRINT 1 IMAGE
: 1
OK COPIES
copy
Number of prints