EasyManua.ls Logo

Sanyo VPC-E1 - SETTING THE FLASH MODE

Sanyo VPC-E1
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 56
Audio data playback
7 Press the REC/PLAY button.
h The playback screen for the audio
track that was just recorded
appears.
8 Play back the recording.
Start forward playback:
Press the SET button.
Pause:
During playback, press the SET button or the [T] button. During fast
forward or fast reverse press the [T] button.
Stop playback:
During playback, press the [W] button.
Fast forward/fast reverse:
h Fast forward/fast reverse playback is possible at 2× (forward only),
5×, 10× and 15×.
h Press the [G] or [H] button during playback to activate fast
forward/fast reverse.
h The playback speed changes each time the [G] or [H] button is
pressed.
Fast forward (press the [H] button)
2× 5× 10× 15×
* Press the [G] button to return to normal speed.
Fast reverse (press the [G] button)
15× 10× 5×
* Press the [H] button to return to normal speed.
<To return to the Audio Recording Screen>
h Press the REC/PLAY button.
CAUTION
If no audio is heard...
i The audio is not played back when the recording is played back in the fast
playback or fast reverse mode.
00:00:00
PLAY
PLAY
PLAY

Table of Contents

Related product manuals