127 English
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor
(post-view) after the [ ] button is pressed and released.
1 Display the OPTION MENU (page 120).
2 Select the post-view icon o, and
press the SET button.
h The Post-view Screen appears.
1 sec:
The post-view image is displayed for
1 second.
2 sec:
The post-view image is displayed for
2 seconds.
OFF:
The post-view image is not displayed.
3 Select the desired setting, and press the SET button.
h This completes the post-view setting.
OFF
2 sec
1 sec
POST VIEW
OK
To Next Page
Loading...
