Sanyo VPC-E1 - Page 151

135 English
ASSIGN FUNCTIONS TO THE ARROW BUTTONS
4 Press the [T] or [W] button.
h Display the function you wish to
assign to the button.
5 Press the SET button.
h The selected function is assigned to
the button, and you are returned to
the Shortcuts Screen.
h To assign functions to the other
button, repeat steps 3 through 5.
6 Press the MENU button.
h The screen to confirm the shortcut
settings appears, and then you are
returned to the OPTION MENU.
h This completes the shortcuts
setting.
<To confirm the assigned
shortcuts>
h On the screen in step 2, press the
MENU button, and the screen to
confirm the shortcut settings
appears.
FLASH
SHORTCUTS
OK
FLASH
EXPOSURE
SHORTCUTS
OK
RECOMMENDED SETTINGS
<When “RECOMMENDED
SETTINGS” is selected>
SHORTCUTS