EasyManua.ls Logo

Sanyo VPC-E1 - Page 194

Sanyo VPC-E1
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 178
Shutter speed Still image shooting mode: 1/2 to 1/2,000 sec.
(Approx. 4 sec. max. when scene select function is
set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Video clip recording mode: 1/30 to 1/10,000 sec.
Sensitivity Still image shooting mode (Standard output
sensitivity*):
Auto (ISO 50 to 400)/ISO 50, ISO 100, ISO 200,
ISO 400, ISO 800 and ISO 1600 (switchable from
the RECORDING MENU)
(Maximum ISO sensitivity increases up to 7200:
when scene select function is set to lamp Q)
* Sensitivity measured in compliance with the ISO
standard (ISO 12232:2006).
Video clip recording mode:
Auto (equivalent to ISO 450 to 3600)/equivalent to
ISO 450, ISO 900, ISO 1800 and ISO 3600
(switchable from the RECORDING MENU)
(Maximum ISO sensitivity up to 7200 variation:
when scene select function is set to lamp Q)
Minimum subject
illumination
Approx. 7 lux (when scene select is set to full auto
mode = and shutter speed is 1/30 sec)
Approx. 2 lux (when scene select is set to lamp mode
Q and shutter speed is 1/15 sec)
Image stabilizer Electronic (video clip recording mode)
Monitor 2.5-inch (6.4 cm) low-temperature poly-silicon TFT
color liquid crystal display, transparent
Approx. 150,000 pixels (Frame coverage: Approx.
100%)
Flash working
range
GN = 3
Approx. 10 cm (3.94 in.) to 1.7 m (5.58 ft.) (Wide)
Approx. 80 cm (31.50 in.) to 1.3 m (4.27 ft.) (Tele)
Flash modes Auto-flash, forced flash, flash off
Focus TTL-type AF (9-point range finder/spot metering AF:
Still image shooting mode; Continuous AF/area: Video
clip recording mode), manual focus
Self-timer Approx. 2-second delay, 10-second delay

Table of Contents

Related product manuals